I just thought I'd try a few on.
1990s-themed PVC raincoat: https://www.youtube.com/watch?v=8QcitBbRdaI
Had this custom-made. My only criticism: not quite soft enough. I opted for 54 PHR as it was suggested (by AI) that 400 microns at around 50-54 PHR is a good all-rounder for both inflatables & raincoats. However, AI is not always consistent, as it later suggested that upping the PHR to 70, while keeping to 400 microns, will provide a very supple, very soft PVC that is good for both raincoats & inflatables. So, in my next custom run, I will opt for 70 PHR.
DINP plasticizer was chosen (I do not like the 6P-free rubbish). It is just as well that I have access to GC-MS so that I can analyse a sample to confirm that the plasticizer is indeed DINP (as per my desired specifications), and to reassure myself that I have not been ripped off/conned with the 6P-free rubbish.
Maybe the hood is a little too big. I might reduce it in my next custom project.
No anti-block additives/lubricants, such as silica or ecruamde, were added to the PVC resin, as I wanted to maximise the noise (rustle, crackle, squeak), which is caused by blocking. Increasing the PHR to 70 will maximise blocking even more.
Y2K Tokidoki PVC Raincoat: https://www.youtube.com/watch?v=nVXDsu-hpSY
Yes, I know it is a bit 'girly' or feminine, but I like the PVC material (from a sensory and fetish standpoint).
One of my favourites: this glossy glass clear PVC is very noisy (because of strong blocking/surface 'cling' or 'stick-slip'), quite soft & supple, and it has a good thickness to it. Was made in the early 2000s, so before the widespread use of the 6P-free PVC rubbish.
Original (vintage) 1980s Jelly Jacket: https://www.youtube.com/watch?v=W7KVDxOq_LY
One of my favourites, as it takes me back to my 1980s childhood. These used to be common, and they came in various glass clear colours. I like the extra-chunky drawstring rope, and this is how I remember them in the 1980s.
Makes a nice noise, due to blocking (stick-slip/surface 'cling') properties and use of phthalate-type plasticizer.
Full-length glass clear PVC Raincoat (PA3C) in red: https://www.youtube.com/watch?v=bUL-O3uS3xk
Very soft & satisfyingly noisy.
Replica (modern) Jelly Jacket: https://www.youtube.com/watch?v=R5jY7_18Xjc
Similar to the 1970s/1980s originals, except the drawstring cord is not chunky and rope-like as per the originals. But still good.
Based on the 1970s/1980s jelly jacket, this is a modern replica.
Soft & squeaky glossy clear blue PVC.
I try on a few PVC Raincoats
-
Pvc Vinyl Enthusiast
- Posts: 273
- Joined: May 18th, 2012, 12:14 am
- Location: UK